Push the screw firmly and move in clockwise slowly to open it. Run the faucet until all the trapped water is moved out from the pipe.Ĭlear the water pressure and make the pipe empty. In the next step, open the soft water faucet available inside the house. Step 01: Turn the bypass lever.įirstly, turn the bypass lever off by turning it to the switch-off mode. Manual regeneration is required when you add more salt to the storage tank. If you are on vacation and no one is there in the house to use the water, the system will shut down itself. The regeneration process only works when someone is using the system. Therefore, the Kinetico water softener regenerates when you use water in the house.Įvery time you use the faucet or flush the toilet, the system uses the regeneration process.
The system is fully automated and runs itself, offering the smooth functioning of the water flow. The system will not have a timer or button to adjust the function. The Kinetico water softener uses kinetic energy to move the water rather than an electrical pump to flow the water in the tank. How to make Kinetico brine tank float adjustment? (Step by step process) Keep doing it until the tab reaches the indicator dot presented in the brine position. Ensure that you are not moving it counterclockwise. The simplest way to adjust the float is to push the water softener valve screw firmly with the help of a screwdriver.
